The Cascadia Vehicle Tents (CVT) Mt. Rainer Pioneer accommodates three people comfortably and can be mounted on hundreds of vehicles. For information on vehicle compatibility, click here.
Follow these easy steps to set up the in minutes!
- Release the velcro straps the go across the top
- Unzip and remove the cover
- Unlatch the two buckles (one on each side) from the unhinged side of the tent
- Grab the ladder, and slide it towards you
- Push down on the ladder to lift the tent up and bring the slowly towards you
- Make sure the ladder is at the correct angle for your vehicle
- Keep the ladder as close to 90 degrees for the most stability
- Grab you spring rods (eight in all, six if your using a pick up truck)
- Insert the straight end of the rod into the bottom hole at the correct angle
- Bend the rod into the grommet hole on each side of the rain fly (on each side of the tent)
- Enjoy Camp!
To break camp:
- Bend the spring rods down and remove them from the grommet holes
- Remove the spring rod from the bottom of the tent
- Place the spring rods back in their bag
- Place the bag on the non-folding side of the tent
- Make sure all doors and are unzipped and inside the tent
- Lift the ladder and fold the tent base over
- Slide the ladder back into place
- Buckle the straps on the unhinged side of the tent (one on each side)
- Replace and Zip the Cover
- Reattach the Velcro straps
